How to do

We use the Screw Press Sludge Dewater machine to dewater the sludge. The following is a brief introduction to the working principle of the machine.

1. Concentration: In fact, when the screw shaft rotates, we set the multiple fixing and moving rings that push the screw shaft outside to start relative movement. Then, under the action of gravity, the water will start to move relative to the ring from the device. Continuous filtration in the gap for rapid concentration

2, Dewatering: This step is actually moving the concentrated sludge forward with the rotation of the screw shaft, and then along the direction of the sludge cake outlet, the pitch of the screw shaft of the device will gradually become smaller, then the ring and the ring The gap between the two will gradually become smaller. Under the continuous operation of the screw shaft, the water in the sludge will be discharged due to the extrusion, so that the solid content of the filter cake will increase continuously, and the continuous dewatering of the sludge will be realized.
 

3, Cleanance: self-cleaning is the rotation of the screw shaft to push the moving rings to rotate, and the equipment relies on the movement between the fixing rings and the moving rings to achieve a continuous self-cleaning process, self-cleaning can well avoid the traditional dewatering machine Blockage problem